Single-source impact analysis using three-dimensional air quality models

Isolating the effects of an individual emissions source on secondary air pollutants such as ozone and some components of particulate matter must incorporate complex nonlinear processes, be sensitive to small emissions perturbations, and account for impacts that may occur hundreds of kilometers away. The ability to evaluate these impacts is becoming increasingly important for efficient air quality management. Here, as part of a recent compliance enforcement action for a violation of the Clean Air Act and as an evaluation of ozone response to single-source emissions plumes, two three-dimensional regional photochemical air quality models are used to assess the impact on ozone from approximately 2000 to 3000 excess t/month of nitrogen oxides emitted from a single power plant in Ohio. Periods in May, July, and August are evaluated. Two sensitivity methods are applied: the "brute-force" (B-F) method and the decoupled direct method (DDM). Using DDM, maximum 1-hr averaged ozone concentrations are found to increase by up to 1.8, 1.3, and 2.2 ppbv during May, July, and August episodes, respectively, and concentration increases greater than 0.5 ppbv occur in Ohio, Pennsylvania, Maryland, New York, West Virginia, Virginia, and North and South Carolina. B-F results for the August episode show a maximum 1-hr averaged ozone concentration increase of 2.3 ppbv. Significant localized decreases are also simulated, with a maximum of 3.6 ppbv in Ohio during the August episode and decreases of 0.50 ppbv and greater in Ohio, Pennsylvania, Maryland, West Virginia, and Virginia. Maximum increases are compared with maximum decreases for the August period using second-order DDM and are found, in aggregate, to be greater in magnitude by 42%. When evaluated during hours when ozone concentrations exceed 0.060 ppm, the maximum increases in ozone are higher than decreases by 82%. The spatial extent of ozone increase in both cases is about triple that of reduction.     

Sonochemical substrate selectivity and reaction pathway of systematically substituted azo compounds

The sonochemical degradation of the systematically substituted azo compound 2,7-dihydroxy-1-phenylazonaphthaline-3,6-disulfonic acid was investigated using a frequency of 850 kHz and an acoustic input power of 61 W. All derivatives were degraded completely within 6h by the ultrasonic treatment. Trifluoromethyl substituted azo compounds exhibited 2-3-fold higher degradation rates in comparison to the reference hydrogen substituted azo compound (k=0.54 h(-1)). In contrast to enzymatic processes (azoreductase or laccase), the ultrasonic treatment for these ortho-, meta-, and para-substituted azo compound showed 1.5-50-fold higher degradation rates. Additionally the ultrasound treatment was characterized by shorter reaction times. As a result of the detection and identification of specific intermediates using LC-MS a reaction pathway of the sonochemical degradation of the analysed azo compound is proposed indicating the formation of cyclohexadienone and naphthalene quinone derivatives.     

Comparative on Causes and Accumulation of Selenium in the Tree-rings Ambient High-selenium Coal Combustion Area from Yutangba, Hubei, China

Toxic trace elements emitted during coal combustion are the main sources of air pollution. They are released into the atmosphere mainly in the forms of fine ash, smoke and flue, and thus adversely affect plant, animal and human health. Selenium is one of toxic and the most volatile in coal. Large amount of atmospheric emission of selenium, as well as selenium present and scrubber stockpiles in ash may create serious environmental problems. In the paper, on the basis of investigating the abundance and distribution of selenium in plant-rings during recent 20 years, the bioaccumulation of selenium is explained that selenium in plant, which were collected from the village of selenium-rich coal combustion, is much higher than that in plants collected away from the village of selenium-rich coal combustion. The main origins of selenium are selenium-rich coal combustion and high-selenium rock weathered. The selenium recycle by food chain and selenium will accumulate and redistribute in environments.     

A Sensitivity Analysis of an Integrated Modelling Approach to Assess the Risk of Wind-borne Spread of Foot-and-mouth Disease Virus from Infected Premises

The sensitivity of an integrated model to assess the potential for wind-borne spread of foot-and-mouth disease (FMD) to variations in key parameters controlling different physical and biological processes was evaluated. The estimated number of farms at risk is sensitive to the virus strain used and the accompanying effective contact rate. The C Noville strain increased the estimated number of exposed farms ranked as high and medium risk of being infected by a factor of 5, compared to the baseline, based on the O UKG 2001 strain. The inclusion of a model for biological ageing of the virus can also have a significant effect on the concentration patterns arising from transport and dispersion of the virus. Its inclusion has the practical advantage of markedly reducing the time required for the calculations. The estimated number of farms affected by exposure to high and medium virus concentrations is not grossly sensitive to attenuation caused by temperature or relative humidity effects. Changes in susceptibility to infection, as determined by the parameter θ in the exposure-risk model, does not change the configuration of the virus plumes, but it does change the distribution of farms at risk by risk category. These findings suggest that a good understanding of characteristics (excretion rates from infected animals, susceptibility of different species to infection, virus survival, etc.) of the virus strain involved in an FMD outbreak is necessary to provide a reliable assessment of the risk of wind-borne spread. In the event of an incursion of FMD, provision for laboratory studies on the virus will be an essential component of the disease response and should be factored into contingency plans.

汶川地震灾区过渡房安置点场地选择中的地震问题

大地震后,如何在最短的时间内在灾区选择比较安全的过渡房安置点建设场地,是一项具有挑战性的工作。本文以四川省汶川8.0级大地震后灾区群众快速安置为背景,论述了选择过渡房安置点场地必须考虑的地震问题,并提出了处理地震断层、地表裂缝、砂土液化、坍塌等实际问题的方案;利用强余震的预测结果,分析了这些灾害对场地可能造成的危害;同时对可能潜在的滑坡、危岩崩塌、泥石流等地质灾害提出相应的处理建议,供安置点规划建设参考。     

Inhibitory effects of red algal extracts on larval settlement of the barnacle Balanus improvisus

We examined the chemical antifouling properties of four sublittoral red algae, Chondrus crispus, Delesseria sanguinea, Osmundea ramosissima, and Polyides rotundus, which are all rarely fouled in the field. Two different approaches were used. Firstly, we tested the effects of lipophilic crude extracts on the settlement behaviour of cyprid larvae of the co-existing barnacle Balanus improvisus. Secondly, in a settlement preference experiment, we tested whether B. improvisus cyprid larvae settle on living algae when given a choice between natural algal surfaces and control surfaces. With this procedure, we were able to test both if the algae inhibit recruitment of cyprids, and if this inhibition is a result of chemistry. The settlement of B. improvisus larvae was strongly inhibited at concentrations estimated to be potentially ecologically relevant for all of the tested extracts. However, only C. crispus significantly inhibited settlement in the preference experiment, even though there was also a tendency for settlement inhibition on P. rotundus and O. ramosissima. In contrast, D. sanguinea seemed to stimulate settlement. This contradiction probably resulted from an extraction of metabolites that naturally occur only inside the alga. However, as this study shows, a combination of settlement assays with whole-cell extracts and preference tests of ecologically relevant fouling organisms on natural algal and control surfaces may be a useful procedure to avoid erroneous conclusions regarding natural antifouling roles of compounds based on settlement assays with only whole-cell extracts. Furthermore, this study also shows that production of inhibitory metabolites may explain the low degree of fouling, especially by B. improvisus, on C. crispus.Communicated by L. Hagerman, Helsingør     

Fetal phenotype of Prader–Willi syndrome due to maternal disomy for chromosome 15

Prader–Willi syndrome (PWS) results from either paternal deletion of 15q11–q13, or maternal uniparental disomy (UPD) of chromosome 15 or imprinting center mutation. Prenatal diagnosis of PWS is currently indicated for chromosomal parental translocation involving chromosome 15 and for decreased fetal movements during the third trimester of gestation. Here we present the prenatal diagnosis of PWS during the first trimester of gestation and autopsy findings. Chorionic villus sampling (CVS) was performed for advanced maternal age at 13 weeks' gestation. CVS showed mosaicism including cells with a normal karyotype and cells with trisomy 15. Amniocentesis showed cells with a normal karyotype. Molecular analysis demonstrated that the fetus had a typical PWS abnormal methylation profile and maternal disomy for chromosome 15. Fetal ultrasound examination showed slightly enlarged lateral ventricles and hypoplasic male external genitalia without intra-uterine growth retardation. The autopsy showed a eutrophic male fetus with facial dysmorphy, hypoplasic genitalia, abnormal position of both feet and posterior hypoplasia of the corpus callosum. This report points out that in a karyotypically normal fetus with ambiguous male external genitalia and cerebral anomalies, extensive cytogenetic and molecular biology studies are strongly recommended because of risk of PWS. Copyright © 2003 John Wiley & Sons, Ltd.